Polyetheretherketone, better known as PEEK, is one of a small number of engineering polymers that can replace metal or outperform commodity plastics in demanding environments. It pairs high strength with excellent temperature capability, broad chemical resistance, and outstanding wear and fatigue behavior, while remaining lightweight, machinable, and clean. That combination explains why teams in oil & gas, aerospace, semiconductor, medical, food & beverage, and power generation keep turning to PEEK when reliability, cleanliness, and total cost of ownership (TCO) matter more than piece price.

This practical primer explains what PEEK is, where it wins, how it compares to metals and common plastics, and what to consider when you specify, design, and buy PEEK parts. If you have any questions, the Canyon Components engineering team is here to help!

This practical primer explains what PEEK is, where it wins, how it compares to metals and common plastics, and what to consider when you specify, design, and buy PEEK parts. — This practical primer explains **what PEEK is**, **where it wins**, **how it compares to metals and common plastics**, and **what to consider when you specify, design, and buy** PEEK parts.

What PEEK Is (and Why It’s Different)

PEEK sits in the PAEK family of high-performance thermoplastics. The polymer backbone contains aromatic rings linked by ether and ketone groups, which gives the material a rare mix of stiffness, heat stability, and chemical inertia. In plain terms, it behaves more like a metal than a typical plastic, yet is much lighter and easier to shape. If you have any questions, the Canyon Components engineering team is here to help!

Core benefits in one view

PEEK is available unfilled and filled (glass fiber, carbon fiber, graphite, PTFE blends, mineral), allowing you to trade off wear, stiffness, and thermal growth to suit the job.

Manufacturing: CNC machining, injection molding, extrusion, and some additive routes like 3D printing. — **Manufacturing**: CNC machining, injection molding, extrusion, and some additive routes like 3D printing.

PEEK vs Metal: A Simple, Business-Oriented Comparison

You don’t replace metal to save pennies on part price, you do it to improve availability, uptime, ergonomics, and cleanliness, and to cut total installed cost.

Where PEEK beats stainless or aluminum

Metal still wins when

Very high loads must be carried in tiny footprints without design changes.
Abrasive solids at high speeds demand hardened surfaces.
Extreme heat far beyond polymer capability (e.g., >300 °C continuous) is present.

The decision is rarely all-or-nothing. Many assemblies mix PEEK wear parts or insulators with metal structure for the best overall result.

The decision is rarely all-or-nothing. Many assemblies mix PEEK wear parts or insulators with metal structure for the best overall result. — The decision is rarely all-or-nothing. Many assemblies mix **PEEK wear parts or insulators** with **metal structure** for the best overall result.

PEEK vs Commodity Plastics: The Case for Upgrading

Commodity or engineering plastics (PTFE, acetal, nylon, UHMW-PE, polycarbonate) are great in their lanes. Problems begin when you ask them to run hot, carry load, resist solvents, or stay dimensionally stable over long maintenance intervals. If you have any questions, the Canyon Components engineering team is here to help!

Why PEEK outlasts common plastics

Creep resistance: Holds shape under load at temperature; less long-term sag.
Heat distortion: Much higher heat deflection temperatures; tolerates hot surfaces.
Chemical window: Broader coverage across fuels, oils, steam, and cleaners.
Wear/tribology: Bearing grades handle dry friction and mixed lubrication better.
Fatigue endurance: Repeated stress cycles without early crack growth.

If a commodity plastic is just barely surviving, PEEK typically stops the unplanned downtime, and that “invisible” value dwarfs the cost delta.

Properties at a Glance

Density: ~1.3 g/cc
Continuous service temp: ~240–260 °C or higher depending on the blend
Tensile strength: high; stable vs heat (grade dependent)
Modulus: high; higher with glass/carbon fill
CTE (thermal expansion): moderate; lower with carbon fiber
Tribology: excellent in bearing grades (PTFE/graphite/carbon blend)
Electrical: good insulator; stable dielectric
Flammability: inherently low; clean smoke/tox in certain grades
Sterilization: tolerates steam, gamma, EtO (grade dependent)

(Exact numbers vary by supplier and grade; treat the list above as directional, not a datasheet.) If you have any questions, the Canyon Components engineering team is here to help!

**Typical PEEK Parts and Where They Shine**

Typical PEEK Parts and Where They Shine

Valve seats, cages, poppets, wear rings
Stable sealing and low galling in hot fluids and solvents; good for chemicals, hydrocarbons, and steam.
Manifolds and fittings
Corrosion-proof pathways; electrical/thermal insulation; easier to keep clean.
Bushings and bearings
Filled bearing grades run with low lubrication; good PV capacity for many duties.
Fasteners and spacers
Light, non-magnetic, non-conductive; no rust-bleed; useful in washdown equipment.
Cleanroom and semiconductor details
Low extractables and outgassing in the right grades; stable geometries for wafer handling.
Medical and food contact components
Sterilization-capable; FDA/USP options; smooth, cleanable surfaces.

Design Guidance (So Your First PEEK Part Works)

PEEK is forgiving, but it’s not “just swap material and hit print.” A few deliberate choices ensure success on the first run. If you have any questions, the Canyon Components engineering team is here to help!

Geometry and wall sections

Avoid knife-edge features; use modest radii and uniform wall thickness where possible.
If replacing metal 1:1, consider local ribs/bosses to maintain stiffness while holding weight targets.
Threads and snap fits work, but avoid sharp roots; consider metallic inserts for repeated assembly.

PEEK is forgiving, but it’s not “just swap material and hit print.” A few deliberate choices ensure success on the first run.

Creep and load

At elevated temperature, polymers creep. If loads are sustained, increase footprint, add ribs, or select filled PEEK (carbon fiber for stiffness, graphite/PTFE for wear).
Where long-term preload is essential (flanges, clamps), design for re-torque or use inserts to spread stress.

Thermal behavior

Plan for CTE. Carbon fiber fills lower expansion; this matters for tight clearances and press fits.
PEEK is more forgiving than metals across thermal cycles but still benefits from balanced sections and gradual transitions.

Friction and wear

For sliding components, choose bearing grades or add lubricating fillers.
In dry or near-dry applications, specify surface finish targets on mating parts and consider micro-texturing where appropriate.

Cleanliness and regulatory

For food, pharma, or semi, request clean handling, traceable lots, and certifications (e.g., FDA, USP Class VI) as needed.
If radiation is part of the environment, ask for radiation-tolerant grades and validate exposure limits up front.

If you have any questions, the Canyon Components engineering team is here to help!

Manufacturing Options and What They Mean for You

CNC machining

Best for low to mid volumes, fast turnarounds, complex one-offs, and retrofits.
Tolerance and finish depend on fixturing, cutter geometry, and heat management; an experienced shop matters.

Injection molding

Best for medium to high volumes or geometries that benefit from repeatability and cycle time.
Requires attention to gate design, flow orientation, annealing, and post-processing to stabilize dimensions.

Extrusion and machining from tube/rod

Efficient for rings, bushings, and wear parts when OD/ID ratios suit extrusion stock.

Additive, 3D Printing Peek (emerging)

Niche fits where internal channels or lattice features are more important than surface finish; still less common for production-critical parts.

Rule of thumb
Start with machining for speed. If the design stabilizes and volumes climb, tooling for molding can drive cost down. If you have any questions, the Canyon Components engineering team is here to help!

**PEEK Manufacturing Options and What They Mean for You**

PEEK Grades in Plain Language

Unfilled PEEK: Clean, strong, versatile; balanced choice for many environments.
Glass fiber-filled: Higher stiffness and temperature stability; watch wear on mating metals.
Carbon fiber-filled: Low CTE, high modulus, good fatigue; excellent when dimensional stability matters.
Bearing grades (graphite/PTFE/carbon): Lower friction and wear; the right pick for sliding parts.
Clean/medical grades: Lower extractables; irradiation or steam-sterilization capable (grade dependent).

Choosing a grade is mostly about what stresses dominate, heat, wear, stiffness, cleanliness, and building from there. If you have any questions, the Canyon Components engineering team is here to help!

When Not to Use PEEK

Very high loads in tiny footprints with no room to grow; metal may still be the safer path.
Abrasive slurries at high speed where hardened, coated metals survive far longer.
Permanent exposure above polymer limits; if continuous >300 °C is real, consider ceramics or metal.
Ultra-low cost, non-critical parts; PEEK’s value is in uptime and cleanliness, not piece price.

Industry Snapshots

Oil & Gas
PEEK valve seats, cages, and wear rings stabilize performance in hot, chemically aggressive media; bearing grades tolerate poor lubrication. For gas service with decompression steps, PEEK jackets in spring-energized seals handle extrusion and cold starts.

Aerospace
Weight reduction and insulation in brackets, covers, and non-structural details. Carbon-fiber PEEK offers stiffness with low thermal growth for components near hot sections.

Semiconductor & Vacuum
Clean grades with low extractables support wafer handling, chamber details, and fixtures. Where outgassing and particle generation are critical, PEEK competes well, especially when combined with spring-energized designs.

Food & Pharma
Washdown, steam, and cleaners that defeat commodity plastics are routine for PEEK. Documentation and clean handling are straightforward.

Power & Transportation
Insulators, bearings, and wear parts benefit from heat capability, light weight, and electrical properties; maintenance windows stretch, and ergonomics improve.

Putting PEEK to Work

Start with the problem, corrosion, weight, wear, cleanliness, or heat.
Pick a grade that aligns with the dominant stress.
Prototype by machining, then optimize geometry for stiffness, wear, and thermal behavior.
Pilot in real conditions, measure downtime and wear, and tune details.
Scale with documentation, lot traceability, clean handling, and clear inspection notes.

Bottom line: PEEK becomes the right choice when your plant, tool, or vehicle needs reliability over longer intervals, cleanliness you can document, and weight/corrosion advantages you can feel on day one. It’s not the cheapest part, but it’s often the least expensive solution by the time the year is over. Request a quote now. If you have any questions, the Canyon Components engineering team is here to help!

PEEK plastic Posts

PEEK 101: Why Engineers Upgrade from Metal and Commodity Plastics