UL Certified O-ring Materials

The most common UL standards for sealing materials include UL 157, which governs rubber gaskets, O-rings, and seals used in electrical devices and enclosures, and UL 94, which tests for flammability and flame retardance of plastic and elastomeric materials. Depending on the application, materials may also require compliance with UL 50 or UL 50E, which define performance criteria for enclosure sealing against dust, moisture, and corrosion. For specialized environments such as high-voltage or chemical systems, Canyon Components also provides materials qualified under other UL certifications for materials for electrical equipment and air duct systems. Our engineering team ensures that each product meets the correct UL category based on its intended application and environmental exposure. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Depending on the specific certification, UL testing can involve a series of mechanical, thermal, and chemical evaluations designed to replicate operating conditions in the field. These include tensile strength and elongation testing, aging and compression set testing, flame propagation analysis, dielectric breakdown, and volume resistivity measurements. For UL 94 flammability, materials are exposed to open flame under controlled conditions to measure ignition time and self-extinguishing behavior. For UL 157, seals are evaluated for resistance to oils, ozone, water, and temperature cycling. Canyon Components’ materials are tested both internally and through UL-recognized laboratories to verify compliance and consistency. Each material batch is validated to ensure that its physical and electrical properties meet or exceed UL-recognized parameters. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

UL certified O-rings and gaskets are used in industries where electrical safety, flame resistance, and product reliability are paramount. Key sectors include aerospace, power generation, automotive electronics, renewable energy, HVAC systems, water treatment, and telecommunications. For example, electrical enclosures and switchgear require UL-rated seals that resist arcing and maintain ingress protection (IP) levels over time. In consumer electronics, UL-approved elastomers are used to ensure insulation and thermal stability within compact, heat-generating devices. Canyon Components supplies materials that not only meet UL compliance but also support additional certifications such as RoHS, REACH, and NSF, simplifying global regulatory approvals for manufacturers. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Each UL-recognized material offers unique advantages depending on the application environment. FFKM compounds like Canrez® and Kalrez® provide unmatched thermal and chemical resistance, ideal for high-temperature electronics and chemical systems. FKM offers an excellent balance between flexibility, fuel resistance, and fire safety, making it common in automotive and aerospace assemblies. Silicone and fluorosilicone materials exhibit low compression set, excellent electrical insulation, and wide temperature tolerance, making them ideal for weatherproof enclosures and outdoor electronics. Canyon Components’ UL-certified elastomers are formulated to retain flexibility and flame retardance even after prolonged heat and UV exposure, ensuring reliable sealing performance throughout the component’s service life. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Yes. UL certification directly enhances the safety of equipment by ensuring that sealing materials resist ignition and maintain insulating properties under stress. For electrical enclosures, UL-approved gaskets help prevent moisture intrusion that can cause arcing or corrosion. In systems exposed to high temperatures or potential flame sources, UL 94-compliant seals reduce fire propagation risk. Canyon Components provides materials that combine low flammability, high dielectric strength, and chemical stability, helping customers design safer, longer-lasting equipment that meets international safety standards. For environments with constant exposure to electrical discharge or high current, our silicone and FKM blends are formulated to prevent surface tracking and dielectric breakdown. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Yes. Canyon Components manufactures UL-certified O-rings and gaskets in both AS568 standard sizes and fully customized geometries. We produce molded, die-cut, and extruded parts to fit specific groove dimensions and equipment designs. Custom formulations can also be developed to meet unique UL categories, such as elevated voltage insulation or low smoke emission. Our precision molding capabilities allow for tight tolerances, ensuring consistent compression and contact integrity even in high-stress assemblies. Every custom product is manufactured under controlled conditions with UL-traceable materials and can be supplied with test data and Certificates of Compliance upon request. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Every UL certified seal or gasket from Canyon Components is supplied with comprehensive documentation verifying compliance and traceability. This includes Certificates of Conformance, UL file numbers, batch identification, and material data sheets showing relevant test results for flame resistance, dielectric performance, and environmental exposure. For manufacturers undergoing product certification, we also provide support with UL submission documentation, assisting with test data, process descriptions, and compliance verification. All records are maintained according to UL’s audit and inspection requirements, allowing customers to confidently include our components in their certified systems without additional testing delays. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Absolutely. Our team supports manufacturers in selecting materials, designing seals, and preparing documentation for UL testing and certification. Whether you are developing a new enclosure, connector, or electronic assembly, we can identify compounds that meet required UL categories while optimizing for cost, performance, and manufacturability. Canyon Components collaborates with UL-approved testing laboratories to ensure materials pass all required evaluations before final submission. We also help customers redesign existing parts to meet UL flammability or dielectric requirements without altering form, fit, or function. By guiding customers through every stage of certification, we help accelerate product approval and bring safe, compliant equipment to market faster. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!

Canyon Components combines decades of material science experience with precision manufacturing and full regulatory compliance. Our UL-certified materials have been validated across multiple categories for flame retardance, electrical safety, and chemical resistance. We provide engineering support, fast lead times, and full traceability, ensuring every product meets both performance and certification standards. Whether you need UL 94-rated silicone gaskets for weatherproof enclosures, UL 157 FKM O-rings for electrical systems, or custom-molded seals for complex devices, Canyon Components delivers components that uphold safety, reliability, and global compliance for critical applications. If you have any questions or require design assistance, feel free to reach out to the Canyon Components engineering team!