canyon components logo

NE70BK08 Datasheet

NE70BK08, NEO, Black, FREON RESISTANT, LT, 70A

NE70BK08 is Canyon’s low-temperature 70 Shore A black Neoprene (CR) compound engineered for O-rings and gaskets that must remain flexible and seal reliably in cold environments, including refrigerant service. This cost-effective material is compatible with Freon and other low-temperature refrigerants while providing good resistance to weathering, moderate heat, and low-temperature solvents. With a service temperature range down to -55°C (-67°F), NE70BK08 maintains elasticity during cold starts and temperature cycling, supporting dependable static and light dynamic sealing. It meets ASTM D2000 requirements and is commonly selected for HVAC, refrigeration, and outdoor industrial equipment. Compare NE70BK08 to Parker C0873-70 and C0557-70 for similar low-temperature Neoprene sealing performance.

 

Common relevant keywords:
low temperature Neoprene, Freon compatible Neoprene, 70 Shore A CR O-rings, refrigeration rubber gaskets, HVAC low temp seals, ASTM D2000 Neoprene compound, cold climate Neoprene elastomer, refrigerant service O-rings, black Neoprene seals, Parker C0873-70 equivalent, C0557-70 alternative, Datasheet, TDS, Test Report, MTR, MSDS, SDS, Parker C0873-70 O-rings, Parker C873-70 neoprene seals, Parker C0873 gasket material, Parker C873 CR O-rings, Parker C0873 refrigerant gas gasket, Parker C0873 low extractibles compound, Parker C0557-70 O-rings, Parker C557-70 neoprene seals, Parker C0557 gasket material, Parker C557 CR O-rings, Parker C0557 drive belt gasket, Parker C0557 neoprene compound

Need a Custom Quote?

We manufacture millions of parts. Get in touch today.

Request a Quote

© 2026 Canyon Components, Inc. All rights reserved. Canyon Components International Corporation • Sitemap

These products may be covered by existing or pending patents. Canyon Components is not liable for the accuracy, currency, or completeness of information herein. All information is subject to change without notice. All trademarks and service marks are the property of their respective owners. Made withgu.dev, Icons by Icons8

* Disclaimer: Kalrez® is a registered trademark of DuPont™. It represents a high-performance perfluoroelastomer used in demanding sealing applications. Please note that the Kalrez® brand is not owned by Canyon Components. All rights and ownership of the Kalrez® trademark are held by DuPont™, ensuring the quality and reliability associated with this renowned brand.