Image shown is representative and may differ from the actual product in size, proportions, and color shade
14.000 in
(355.60 mm)
21.000 in
(533.40 mm)
12
1.130 in
(28.70 mm)
18.750 in
(476.25 mm)
1/4"
EPDM EP50BK01 Full Face Gasket, Size: 150#-14"-FF-1/4"
Material: EPDM EP50BK01 Full Face Gasket
Size: 150#-14"-FF-1/4" Full Face Gasket
Part Number: EP50BK01-150#-14"-FF-1/4"
EP50BK01
EPDM (EPR, EPM)
50
Shore A
Sulfur Cured
Color: Black
Detailed Description
EP50BK01-150#-14"-FF-1/4" is a Black, 50 Shore A, Sulfur Cured EPDM (EPR, EPM) Full Face Gasket. It is a 50 durometer EPDM (EPR, EPM). [ EP50BK01-150#-14"-FF-1/4" is a size 14, 150#-FF ASME Full Face Gasket. Material: 50 Durometer EPDM EP50BK01 Full Face Gasket Size: 150#-14"-FF-1/4", 14 Pipe Size X 355.6mm ID X 533.4mm OD X 12 Bolt Qty X 28.700mm Bolt Dia. X 476.250mm Bolt Circle X 1/4" Thickness
| Technical Specification | Value |
|---|---|
| Compound Number | EP50BK01 |
| Material | EPDM (EPR, EPM) |
| Cure | Sulfur Cured |
| Color | Black |
| Durometer | 50 Shore A Hardness |
| High Temperature | 150 °C / 302 °F |
| Low Temperature | -55 °C / -67 °F |
| Geometry Specifications | |
| Type | Full Face Gasket |
| Size | 150#-14"-FF-1/4" |
| Pipe Size | 14 |
| ID | 355.60 mm / 14.000 in |
| OD | 533.40 mm / 21.000 in |
| Bolt Qty | 12 |
| Bolt Dia. | 28.70 mm / 1.130 in |
| Bolt Circle | 476.25 mm / 18.750 in |
| Thickness | 1/4" |
Canyon’s EP50BK01 is a 50 Shore A black EPDM compound that is sulfur cured and designed as a flexible, cost-effective sealing material for general-purpose applications. Its moderate durometer provides a balance of conformability and mechanical strength, making it suitable for seals that must accommodate surface irregularities while maintaining good abrasion resistance and low compression set. With a service temperature range of -55°C to 130°C (-67°F to 266°F), EP50BK01 performs reliably in outdoor and industrial environments where resistance to weathering, ozone, and heat is required. The compound’s high elongation and stable tensile properties support dependable performance in static and light dynamic sealing conditions.
EP50BK01 meets ASTM D2000 M2BA510 requirements and is commonly used in industrial equipment, enclosures, and general sealing applications where affordability and durability are key selection factors. It is often selected as a soft-to-medium EPDM option for vibration isolation and low clamp-load sealing scenarios. This material is commonly cross-referenced as an alternative to Parker E1100-50 for similar EPDM sealing applications.
Common relevant keywords:
EPDM rubber seals, 50 Shore A EPDM, sulfur cured EPDM, flexible EPDM O-rings, soft EPDM gaskets, low clamp load seals, weather resistant EPDM rubber, ozone resistant sealing material, industrial EPDM rubber parts, low compression set EPDM, outdoor rubber gaskets, Parker E1100-50 equivalent, EPDM vibration sealing, Datasheet, TDS, Test Report, MTR, MSDS, SDS
