Image shown is representative and may differ from the actual product in size, proportions, and color shade
52.000 in
(1320.80 mm)
58.810 in
(1493.77 mm)
52
1.250 in
(31.75 mm)
56.560 in
(1436.62 mm)
1/2"
EPDM EP70BK01 Full Face Gasket, Size: 150#-52"B-FF-1/2"
Material: EPDM EP70BK01 Full Face Gasket
Size: 150#-52"B-FF-1/2" Full Face Gasket
Part Number: EP70BK01-150#-52"B-FF-1/2"
EP70BK01
EPDM (EPR, EPM)
70
Shore A
Sulfur Cured
Color: Black
Detailed Description
EP70BK01-150#-52"B-FF-1/2" is a Black, 70 Shore A, Sulfur Cured EPDM (EPR, EPM) Full Face Gasket. It is a 70 durometer EPDM (EPR, EPM). [ EP70BK01-150#-52"B-FF-1/2" is a size 52 B, 150#-FF ASME Full Face Gasket. Material: 70 Durometer EPDM EP70BK01 Full Face Gasket Size: 150#-52"B-FF-1/2", 52 B Pipe Size X 1320.8mm ID X 1493.77mm OD X 52 Bolt Qty X 31.750mm Bolt Dia. X 1436.620mm Bolt Circle X 1/2" Thickness
| Technical Specification | Value |
|---|---|
| Compound Number | EP70BK01 |
| Material | EPDM (EPR, EPM) |
| Cure | Sulfur Cured |
| Color | Black |
| Durometer | 70 Shore A Hardness |
| High Temperature | 130 °C / 266 °F |
| Low Temperature | -55 °C / -67 °F |
| Geometry Specifications | |
| Type | Full Face Gasket |
| Size | 150#-52"B-FF-1/2" |
| Pipe Size | 52 B |
| ID | 1320.80 mm / 52.000 in |
| OD | 1493.77 mm / 58.810 in |
| Bolt Qty | 52 |
| Bolt Dia. | 31.75 mm / 1.250 in |
| Bolt Circle | 1436.62 mm / 56.560 in |
| Thickness | 1/2" |
Canyon’s EP70BK01 is a 70 Shore A black EPDM compound that is sulfur cured for reliable flexibility, abrasion resistance, and cost-effective sealing performance. It provides strong resistance to weathering, ozone, and environmental exposure, along with good heat resistance and low compression set for consistent long-term sealing. With a service temperature range of -55°C to 130°C (-67°F to 266°F), EP70BK01 performs well across typical industrial and outdoor applications where durability and affordability are key. Its balanced mechanical properties make it suitable for static and light dynamic seals that must accommodate surface irregularities and vibration.
EP70BK01 meets ASTM D2000 M3BA710 and M4CA710 requirements and is commonly used in industrial equipment, enclosures, and general-purpose sealing applications. It is frequently cross-referenced as an alternative to Parker E0603-70 for comparable sulfur-cured EPDM sealing needs. Canyon Components also offers additional EPDM formulations to address specific temperature ranges, curing systems, and compliance requirements.
Common relevant keywords:
EPDM rubber seals, 70 Shore A EPDM, sulfur cured EPDM, black EPDM O-rings, general purpose EPDM gaskets, weather resistant EPDM rubber, ozone resistant sealing material, low compression set EPDM, industrial EPDM sealing solutions, outdoor rubber gaskets, Parker E0603-70 equivalent, EPDM vibration seals, Datasheet, TDS, Test Report, MTR, MSDS, SDS
