Image shown is representative and may differ from the actual product in size, proportions, and color shade
2.380 in
(60.45 mm)
6.000 in
(152.40 mm)
4
0.750 in
(19.05 mm)
4.750 in
(120.65 mm)
1/16"
EPDM EP70BK04 Full Face Gasket, Size: 150#-2"-FF-1/16"
Material: EPDM EP70BK04 Full Face Gasket
Size: 150#-2"-FF-1/16" Full Face Gasket
Part Number: EP70BK04-150#-2"-FF-1/16"
Color: Black
Detailed Description
EP70BK04-150#-2"-FF-1/16" is a Black, 70 Shore A, Peroxide Cured EPDM (EPR, EPM) Full Face Gasket. It is a 70 durometer EPDM (EPR, EPM). [EP70BK04 is manufactured with the following features & specifications: Metal Detectable, FDA Compliant. EP70BK04-150#-2"-FF-1/16" is a size 2, 150#-FF ASME Full Face Gasket. Material: 70 Durometer EPDM EP70BK04 Full Face Gasket Size: 150#-2"-FF-1/16", 2 Pipe Size X 60.45mm ID X 152.4mm OD X 4 Bolt Qty X 19.050mm Bolt Dia. X 120.650mm Bolt Circle X 1/16" Thickness
| Technical Specification | Value |
|---|---|
| Compound Number | EP70BK04 |
| Material | EPDM (EPR, EPM) |
| Cure | Peroxide Cured |
| Color | Black |
| Durometer | 70 Shore A Hardness |
| High Temperature | 150 °C / 302 °F |
| Low Temperature | -55 °C / -67 °F |
| Geometry Specifications | |
| Type | Full Face Gasket |
| Size | 150#-2"-FF-1/16" |
| Pipe Size | 2 |
| ID | 60.45 mm / 2.380 in |
| OD | 152.40 mm / 6.000 in |
| Bolt Qty | 4 |
| Bolt Dia. | 19.05 mm / 0.750 in |
| Bolt Circle | 120.65 mm / 4.750 in |
| Thickness | 1/16" |
| Other Specifications | |
Metal Detectable | |
FDA Compliant | |
Canyon’s EP70BK04 is a 70 Shore A black EPDM compound that is peroxide cured and engineered for metal-detectable, FDA-compliant sealing in food manufacturing and sanitary processing applications. Designed to meet FDA 21 CFR 177.2600 requirements, this material supports contamination control programs by allowing detection of seal fragments in food production environments. With a service temperature range of -57°C to 150°C (-70°F to 300°F), EP70BK04 delivers reliable performance in hot water, cleaning, and washdown conditions while maintaining good abrasion resistance and low compression set. Its peroxide-cured formulation enhances heat resistance, aging stability, and long-term sealing integrity compared to standard sulfur-cured EPDM grades.
EP70BK04 meets ASTM D2000 M2DA710 requirements and is commonly used in food processing equipment, conveyors, pumps, and sanitary sealing locations where metal detectability and regulatory compliance are critical. The compound provides a practical balance of durability, detectability, and cost efficiency for food-grade EPDM sealing applications. Canyon Components offers additional metal-detectable and FDA-compliant elastomer options to support varying detection, temperature, and regulatory requirements.
Common relevant keywords:
metal detectable EPDM seals, FDA compliant EPDM O-rings, food processing rubber gaskets, 70 Shore A EPDM material, peroxide cured EPDM rubber, metal detectable elastomers, sanitary EPDM sealing solutions, food safety rubber seals, hot water resistant EPDM, low compression set EPDM, industrial food-grade gaskets, Datasheet, TDS, Test Report, MTR, MSDS, SDS
