EPDM EP70BK26 O-Ring, Size: -006
Material: EPDM EP70BK26 O-Ring
Size: AS568 -006 O-Ring
Part Number: EP70BK26-OR-006
EP70BK26
EPDM (EPR, EPM)
70
Shore A
PTFE Filled
Sulfur Cured
Color: Black
Detailed Description
EP70BK26-OR-006 is a Black, 70 Shore A, Sulfur Cured EPDM (EPR, EPM) O-Ring. EP70BK26 is manufactured with the following features & specifications: PTFE Filled. EP70BK26-OR-006 is AS568 size -006 O-Ring also referred to as 1.78mm (Cross Sectional Diameter (CS)) x 2.9mm (Inside Diameter (ID)).
Material: EPDM EP70BK26 O-Ring
Size: AS568 -006, 1.78mm CS X 2.90mm ID (0.070" CS X 0.114" ID)
| Technical Specification | Value |
|---|---|
| Compound Number | EP70BK26 |
| Material | EPDM (EPR, EPM) |
| Cure | Sulfur Cured |
| Color | Black |
| Durometer | 70 Shore A |
| High Temperature | 130 °C / 266 °F |
| Low Temperature | -55 °C / -67 °F |
| Geometry Specifications | |
| Cross Sectional Geometry | O-Ring |
| Size Standard | AS568 |
| Size | -006 |
| Cross Section (CS) | 1.78 mm / 0.070 in |
| Inside Diameter (ID) | 2.90 mm / 0.114 in |
Canyon’s EP70BK26 is a 70 Shore A black EPDM compound that is sulfur cured and internally filled with PTFE to enhance lubricity and reduce installation friction. This formulation delivers reliable environmental resistance with good heat stability, abrasion resistance, and low compression set, making it well suited for general-purpose sealing where smoother assembly and reduced stick-slip are desired. With a service temperature range of -55°C to 130°C (-67°F to 266°F), EP70BK26 maintains flexibility and sealing integrity across common industrial operating conditions. The PTFE-filled design supports improved performance in dynamic or sliding interfaces compared to unfilled EPDM grades.
EP70BK26 meets ASTM D2000 M2BA707 requirements and is commonly used in industrial equipment, enclosures, and applications where weathering resistance and easier installation are priorities. Its balanced mechanical properties provide dependable performance in static and light dynamic seals without the cost of specialty elastomers. Canyon Components offers additional EPDM formulations with alternative cure systems and fillers to meet specific friction, temperature, and compliance needs.
Common relevant keywords:
PTFE filled EPDM seals, low friction EPDM O-rings, 70 Shore A EPDM rubber, sulfur cured EPDM material, internally lubricated EPDM, weather resistant EPDM gaskets, abrasion resistant rubber seals, industrial EPDM sealing solutions, black EPDM elastomer parts, smooth installation EPDM seals, general purpose EPDM gaskets, Datasheet, TDS, Test Report, MTR, MSDS, SDS