
Image shown is representative and may differ from the actual product in size, proportions, and color shade
1.660 in
(42.16 mm)
4.630 in
(117.60 mm)
4
0.630 in
(16.00 mm)
3.500 in
(88.90 mm)
1/32"

HNBR Parker KA158-70 Full Face Gasket, Size: 150#-1.25"-FF-1/32"
Material: HNBR Parker KA158-70 Full Face Gasket
Size: 150#-1.25"-FF-1/32" Full Face Gasket
Part Number: KA158-70-150#-1.25"-FF-1/32"
Parker Seal® (Parker)
KA158-70
HNBR (Hydrogenated Nitrile)
70
Shore A
Low Temperature Material
Color: Black
Detailed Description
KA158-70-150#-1.25"-FF-1/32" is a Black, 70 Shore A, HNBR (Hydrogenated Nitrile) Full Face Gasket made from Parker Seal® (Parker). It is a 70 durometer HNBR (Hydrogenated Nitrile). Parker Seal® (Parker) KA158-70 is manufactured with the following features & specifications: Low Temperature Material, General Purpose Material. KA158-70-150#-1.25"-FF-1/32" is size 150#-1.25"-FF-1/32" Full Face Gasket also referred to as 1.25 (Pipe Size) x 42.16mm (ID) x 117.6mm (OD) x 4 (Bolt Qty) x 16mm (Bolt Dia.) x 88.9mm (Bolt Circle) x 1/32" (Thickness). KA158-70-150#-1.25"-FF-1/32" is a size 1.25, 150#-FF ASME Ring Gasket. Material: 70 Durometer HNBR Parker KA158-70 Full Face Gasket Size: 150#-1.25"-FF-1/32", 1.25 Pipe Size X 42.16mm ID X 117.6mm OD X 4 Bolt Qty X 16.000mm Bolt Dia. X 88.900mm Bolt Circle X 1/32" Thickness
| Technical Specification | Value |
|---|---|
| Compound Number | KA158-70 |
| Brand | Parker Seal® (Parker) |
| Material | HNBR (Hydrogenated Nitrile) |
| Color | Black |
| Durometer | 70 Shore A Hardness |
| High Temperature | 149 °C / 300 °F |
| Low Temperature | -40 °C / -40 °F |
| Geometry Specifications | |
| Type | Full Face Gasket |
| Size | 150#-1.25"-FF-1/32" |
| Pipe Size | 1.25 |
| ID | 42.16 mm / 1.660 in |
| OD | 117.60 mm / 4.630 in |
| Bolt Qty | 4 |
| Bolt Dia. | 16.00 mm / 0.630 in |
| Bolt Circle | 88.90 mm / 3.500 in |
| Thickness | 1/32" |
Parker’s KA158-70 is a 70 Shore A black HNBR (Hydrogenated Nitrile, HSN) compound engineered for sealing applications that require enhanced low-temperature flexibility, improved heat resistance, and broad chemical compatibility compared to standard NBR materials. Qualified to ASTM D2000 M2DH716, it offers reliable performance across a service temperature range of approximately -40°F to 300°F, with short-term capability up to 325°F, while maintaining good tensile strength, elongation, and low compression set. The hydrogenated nitrile chemistry provides strong resistance to aliphatic hydrocarbons including petroleum oils, mineral oils, diesel fuel, fuel oils, as well as vegetable oils, animal fats, glycols, water, and salt or alkali solutions. Its resistance to ozone, aging, and weathering supports long-term durability in both indoor and outdoor service environments.
KA158-70 is commonly used in automotive, industrial, and fluid power systems where exposure to oils, fuels, hydraulic fluids, and temperature cycling is expected. It is compatible with HFA, HFB, and HFC hydraulic fluids and performs well in glycol- and water-based media at moderate temperatures. This compound is not recommended for chlorinated hydrocarbons, strong acids, polar solvents such as ketones and acetone, or automotive and aircraft brake fluids. Canyon Components offers equivalent HNBR materials designed to match the low-temperature performance, chemical resistance, and mechanical properties of Parker KA158-70 for demanding sealing applications.
Common relevant keywords:
HNBR sealing materials, hydrogenated nitrile rubber O-rings, 70 Shore A HNBR compound, low temperature HNBR seals, oil and fuel resistant elastomers, hydraulic fluid compatible rubber, diesel fuel O-rings, weather resistant nitrile seals, industrial HNBR gaskets, Parker KA158-70 equivalent, Datasheet, TDS, Test Report, MTR, MSDS, SDS, Parker KA158-70 O-rings, Parker KA158 HNBR seals, Parker KA158 gasket material, Parker KA158-75 hydrogenated nitrile O-rings, Parker KA158 low temperature gasket, Parker KA158 HSN compound


