EPDM EP95BK20 O-Ring, Size: -010
Material: EPDM EP95BK20 O-Ring
Size: AS568 -010 O-Ring
Part Number: EP95BK20-OR-010
EP95BK20
EPDM (EPR, EPM)
95
Shore A
Steam Resistant
High Temperature Material
L'Garde Cured
Anti-Explosive Decompression
Color: Black
Detailed Description
EP95BK20-OR-010 is a Black, 95 Shore A, L'Garde Cured EPDM (EPR, EPM) O-Ring. EP95BK20 is manufactured with the following features & specifications: Steam Resistant, High Temperature Material, Anti-Explosive Decompression. EP95BK20-OR-010 is AS568 size -010 O-Ring also referred to as 1.78mm (Cross Sectional Diameter (CS)) x 6.07mm (Inside Diameter (ID)).
Material: EPDM EP95BK20 O-Ring
Size: AS568 -010, 1.78mm CS X 6.07mm ID (0.070" CS X 0.239" ID)
| Technical Specification | Value |
|---|---|
| Compound Number | EP95BK20 |
| Material | EPDM (EPR, EPM) |
| Cure | L'Garde Cured |
| Color | Black |
| Durometer | 95 Shore A |
| High Temperature | 290 °C / 554 °F |
| Low Temperature | -50 °C / -58 °F |
| Geometry Specifications | |
| Cross Sectional Geometry | O-Ring |
| Size Standard | AS568 |
| Size | -010 |
| Cross Section (CS) | 1.78 mm / 0.070 in |
| Inside Diameter (ID) | 6.07 mm / 0.239 in |
| Other Specifications | |
Anti-Explosive Decompression | |
Canyon’s EP95BK20 is an extremely high-temperature steam-resistant EPDM compound formulated at a very high 95 Shore A hardness for applications exposed to extreme pressure and extrusion forces. Developed using L’Garde Y267 technology, it delivers reliable sealing performance in hot water and steam service up to 290°C (554°F), with short-term steam excursions reaching 315°C (600°F). The very high durometer provides exceptional resistance to extrusion and deformation while maintaining strong abrasion resistance and long-term durability. EP95BK20 is resistant to polar fluids but is not recommended for use with hydrocarbon fuels or oils, consistent with EPDM chemistry.
EP95BK20 is commonly used in geothermal, energy, and industrial steam systems where conventional elastomers fail under extreme heat and pressure. Its combination of extreme hardness, steam stability, and weathering resistance makes it well suited for valves, pumps, and critical high-temperature process sealing applications. This compound is frequently cross-referenced as an alternative to Parker E0962-90 for extreme high-temperature steam EPDM sealing requirements.
Common relevant keywords:
extreme steam EPDM seals, 95 Shore A EPDM rubber, high hardness EPDM O-rings, geothermal steam elastomer seals, ultra high temperature EPDM gaskets, extrusion resistant EPDM material, L’Garde Y267 EPDM compound, steam service rubber seals, energy industry EPDM sealing solutions, high pressure steam O-rings, Parker E0962-90 equivalent, Datasheet, TDS, Test Report, MTR, MSDS, SDS