PEEK Bushings (Polyetheretherketone)
Bushings for High-Performance Industrial Applications
PEEK bushings are high-performance thermoplastic components designed to provide low-friction guidance, wear resistance, and dimensional stability in demanding industrial environments. Manufactured from polyether ether ketone (PEEK), these bushings are widely used in aerospace, semiconductor manufacturing, medical devices, oil and gas, automotive, food processing, chemical processing, industrial automation, and precision machinery where conventional plastic or metal bushings may not provide sufficient performance.
PEEK offers an outstanding combination of mechanical strength, high temperature capability, chemical resistance, and wear resistance. These properties make PEEK bushings an excellent choice for applications involving continuous loading, elevated temperatures, aggressive chemicals, and tight dimensional tolerances.
Canyon Components supplies standard and custom PEEK bushings along with precision machined components, wear parts, guide rails, bearings, spacers, washers, tubing, and other engineered thermoplastic solutions.
Check with one of Canyon’s helpful product engineers for an expert material and manufacturing recommendation.
Keywords: PEEK bushings, polyether ether ketone bushings, PEEK sleeve bushings, plastic bushings, high temperature bushings, chemical resistant bushings, wear bushings, precision bushings, custom PEEK bushings, machined PEEK bushings, industrial bushings, bearing bushings, Datasheet, TDS, Test Report, MTR, MSDS, SDS
PEEK custom Bushings from Canyon Components deliver high strength, chemical resistance, and thermal stability for critical applications.
PEEK Plastic (Polyetheretherketone) Materials Available
This table shows many of our standard materials and links out to our O-ring store. Get in touch with us if you need a custom gasket, custom molded part, or non-standard geometry!
Filter by
Material Brand
Durometer
Temperature Search (°C)
Material Compliance
Specification
Size Search
___X____
PEEK Custom Impeller
Carbon Fiber Reinforced 3D Printed PEEK Impeller
Custom PEEK Bearing
Custom PEEK Bearing for Extreme Applications
PEEK Bushings
Injection Molded PEEK Bushings
Custom PEEK Parts
Carbon Filled Custom PEEK Parts
PEEK Springs
PEEK Springs for High-Temperature Applications
PEEK Custom Part
PEEK Electronic Circuit Board
PEEK Fittings
Custom PEEK Adapters for Medical Devices
PEEK Connector
Custom PEEK UHV Connector
Carbon Filled PEEK Custom Part
Carbon Filled PEEK 3D Printed Impeller
Custom PEEK Impeller
Virgin PEEK Machined Impeller
Custom PEEK Part
Custom 3D Printed PEEK Part
Custom PEEK Electronics
Custom Thin Film PEEK Electronics
Custom PEEK Parts
Custom PEEK Parts for Extreme Applications
PEEK Custom Parts
Virgin PEEK Custom Parts
Custom PEEK Parts
Custom PEEK Parts for Industrial Applications
Custom PEEK Parts
Carbon Filled Machined PEEK Parts
PEEK Fastener
High Temperature PEEK Fastener
PEEK Filter
PEEK Filter for Extreme Applications
PEEK Fittings
PEEK Fittings for Medical Device Fluids
Various PEEK Gears
PEEK Gears with Steel Hubs
PEEK Valves
PEEK Valves for Fluid Control Systems
PEEK Zip Ties
PEEK Zip Ties for Extreme Applications
PEEK Cable Ties
PEEK Cable Ties for Extreme Applications
PEEK Fasteners
PEEK Fasteners for Extreme Applications
Get a Quote Now!
Please consult a Canyon Components Engineer about your specific application and we will use our decades of experience to formulate a solution that fits your need.
Features of PEEK Bushings
- Outstanding Mechanical Strength: High load capacity and excellent dimensional stability under continuous mechanical stress.
- Excellent Wear Resistance: Low-friction material with outstanding abrasion resistance for long service life.
- High Temperature Capability: Maintains mechanical properties at temperatures beyond the limits of many engineering plastics.
- Excellent Chemical Resistance: Resistant to oils, fuels, steam, solvents, and many industrial chemicals.
- Precision Manufacturing: Available in standard and custom-machined configurations with tight dimensional tolerances.
- Standard and Custom Solutions: Offered as sleeve bushings, flanged bushings, split bushings, and fully custom machined components.
Limitations of PEEK Bushings
- Higher Initial Material Cost: Premium engineering plastic with a higher cost than nylon, acetal, or UHMW polyethylene.
- Proper Design Is Required: Performance depends on correct shaft finish, clearance, loading, and operating conditions.
- Not Necessary for Every Application: Lower-cost engineering plastics may be sufficient for less demanding environments.
- Routine Inspection Recommended: Periodic inspection helps maintain proper clearances in high-load or high-speed applications.
Applications of PEEK Bushings
- Aerospace: Bearings, guide components, and wear parts for flight systems and aircraft equipment.
- Semiconductor Manufacturing: Wafer handling equipment, vacuum systems, chemical processing equipment, and automation machinery.
- Medical Equipment: Surgical instruments, diagnostic equipment, laboratory devices, and sterilization systems.
- Industrial Automation: Robotics, conveyors, linear guides, pick-and-place systems, and precision machinery.
- Chemical Processing: Pumps, valves, instrumentation, agitators, and process equipment exposed to aggressive chemicals.
- Food Processing: Wear components and bushings for processing and packaging equipment requiring durability and repeated cleaning.
- Oil & Gas: Downhole tools, valve assemblies, pumps, compressors, and production equipment.
Conclusion
PEEK bushings provide outstanding mechanical strength, wear resistance, dimensional stability, and chemical compatibility for demanding industrial applications. Their ability to operate under high loads, elevated temperatures, and aggressive environments makes them an excellent choice for aerospace, semiconductor manufacturing, medical equipment, industrial automation, food processing, chemical processing, oil and gas, and many other precision engineering applications.
Canyon Components supplies standard and custom PEEK bushings, precision machined components, guide rings, wear components, bearings, spacers, washers, tubing, structural parts, and a comprehensive range of high-performance thermoplastic solutions for demanding industrial applications.
Please consult a Canyon Components Engineer about your specific application and we will use our decades of experience to formulate a solution that fits your need.
Back to Plastics Hub
