UL Certified Viton™ for Various Industries
UL Certified Viton™ (FKM) fluorocarbon elastomers are used across a wide range of industries for manufacturing O-rings, gaskets, seals, and custom molded parts that must meet flammability, electrical safety, and regulatory compliance requirements. UL certification provides third-party validation that specific Viton™ compounds meet defined performance criteria related to flammability, heat resistance, and material stability, making them suitable for use in safety-critical applications.
UL Certified Viton™ O-rings, gaskets, and custom molded parts are commonly specified in electrical equipment, industrial machinery, automotive systems, aerospace components, energy infrastructure, and consumer products where fire safety, material traceability, and consistent performance are essential. These materials combine the inherent chemical and temperature resistance of Viton™ with documented compliance to UL standards.
Canyon Components works closely with customers to identify UL-recognized Viton™ compounds and provide compliant sealing solutions that align with both application demands and regulatory requirements. Contact our expert staff for assistance with UL Certified Viton™ O-rings, gaskets, and custom molded parts.
Common names include: FKM (Fluorocarbon), Fluorocarbon Rubber
Trade names include: Viton™, Fluorel®, Technoflon®, Dai-El®
Features of UL Certified Viton™
- UL Certified Viton™ O-rings, gaskets, and custom molded parts meet defined flammability and safety performance criteria
- Viton™ materials provide excellent resistance to fuels, oils, lubricants, and hydrocarbon-based fluids
- UL Certified Viton™ compounds maintain mechanical integrity at elevated operating temperatures
- Viton™ O-rings and gaskets exhibit low compression set for long-term sealing reliability
- Viton™ materials offer excellent resistance to ozone, weathering, and aging
- UL Certified Viton™ compounds are available in controlled formulations with documentation support
Limitations of UL Certified Viton™
- UL Certified Viton™ O-rings, gaskets, and custom molded parts have poor resistance to hot water and superheated steam
- Viton™ materials are not recommended for strong amines, ketones, or highly polar solvents unless specialty grades are specified
- UL certification applies only to specific compounds and thicknesses and does not automatically extend to all Viton™ formulations
- Viton™ service temperature range varies by compound, with a typical maximum of 437°F (225°C)
- Certain applications may require alternative UL-listed elastomers depending on regulatory scope
Please consult a Canyon Components Engineer about your specific application and we will use our decades of experience to formulate a solution that fits your need.
FKM & Viton™ High Performance Polymer Types
There are many types of FKM Polymer Types that Canyon Components offers.
This includes FKM Types A, B, F, GLT, GFLT, XLT, ULT, ETP, & TBR.
The table below is a Viton™ selection guide that lays out the pluses and minuses of each variation.
Key: 1 = Excellent 2 = Good 3 = Poor 4 = Not Recommended
| Types of FKM | A | GF | GLT | GLT ED | GFLT | XLT | ETP | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Canyon Compound Number | VT75BK00 | VT75BK20 | VT75BK30 | VT90BK31 | VT75BK40 | VT75BK50 | VT75BK60 | |||||||
| Description | General Purpose | General Purpose High Fluorine |
Low Temp | Low Temp Resistant to Explosive Decompression |
Low Temp High Fluorine |
Extreme Low Temp High Fluorine |
Viton® Extreme High Fluorine FEPM |
|||||||
| Cure Type | Bisphenol | Peroxide | Peroxide | Peroxide | Peroxide | Peroxide | Peroxide | |||||||
| Typical Fluorine Content | 66 | 69.5 | 64 | 64 | 66.5 | 66.5 | 67 | |||||||
| Typical High Temp Range °F (°C) | 437 (225) | 437 (225) | 437 (225) | 437 (225) | 437 (225) | 437 (225) | 437 (225) | |||||||
| Typical Low Temp Range °F (°C) | -15 (-26) | -15 (-26) | -40 (-40) | -40 (-40) | -35 (-37) | -54 (-48) | -6 (-21) | |||||||
| TR-10 °F (°C) | 1 (-17) | -6 (-21) | -22 (-30) | -22 (-30) | -11 (-24) | -40 (-40) | 12 (-11) | |||||||
| Oxygenated Automotive Fuels (containing MeOH, EtOH, MTBE, etc.) | 4 | 1 | 4 | 4 | 1 | 1 | 1 | |||||||
| Reciprocating Engine Lubricating Oils (SE-SF Grades) | 2 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Aliphatic Hydrocarbon Process Fluids,Chemicals | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Aromatic Hydrocarbon Process Fluids, | 1 | 1 | 2 | 2 | 1 | 1 | 1 | |||||||
| Aqueous Fluids: Water, Steam, Mineral Acids (H2SO4, HNO3, HCl, etc.) | 3 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||
| Amines, High pH Caustics | 4 | 4 | 4 | 4 | 4 | 4 | 1 |
FKM (Viton™) UL Certified Materials Available
This table shows many of our standard materials and links out to our O-ring store. Get in touch with us if you need a custom gasket, custom molded part, or non-standard geometry!
Filter by
Temperature Search (°C)
Please consult a Canyon Components Engineer about your specific application and we will use our decades of experience to formulate a solution that fits your need.
What Are UL Certified Elastomer Materials?
UL Certified elastomer materials are compounds that have been evaluated and recognized by Underwriters Laboratories (UL) for compliance with specific safety and performance standards. In sealing applications, UL certification is most often associated with flammability ratings, electrical safety considerations, and material behavior under heat exposure.
Common Considerations for UL Certified Elastomers
- Flammability Performance: Materials are evaluated for ignition resistance, burn rate, and self-extinguishing behavior
- Material Thickness and Geometry: UL recognition is specific to tested thicknesses and part configurations
- Electrical Safety: Materials used in electrical equipment must not compromise insulation or enclosure integrity
- Thermal Stability: Elastomers must maintain performance when exposed to elevated temperatures
- Documentation and Traceability: UL-recognized materials require controlled documentation and labeling
- Application-Specific Scope: UL certification applies only within defined use conditions and environments
Key UL Standards Relevant to Viton™
- UL 94 – Flammability of Plastic Materials: UL 94 classifies materials based on their flammability characteristics. Certain Viton™ compounds may achieve UL 94 V-0, V-1, or V-2 ratings, depending on formulation and thickness, making them suitable for fire-sensitive applications.
- UL Recognized Components: UL recognition applies to specific materials or components used within certified assemblies. Viton™ compounds may be specified as part of UL-recognized sealing systems in electrical or industrial equipment.
- Industry-Specific UL Requirements: Different industries apply UL standards differently, including electrical equipment, industrial controls, appliances, and energy systems. Proper material selection is critical to ensure compliance.
- UL 157: UL 157 covers gaskets and seals used in electrical equipment, focusing on material performance, aging resistance, and electrical safety considerations. Elastomer O-rings and gaskets meeting UL 157 requirements are commonly used in enclosures and industrial assemblies.
Please consult a Canyon Components Engineer about your specific application and we will use our decades of experience to formulate a solution that fits your need.
UL Certified
UL Certified Materials
Explore UL Certified Materials, rigorously tested for safety and performance, meeting strict standards for reliability across industries.
UL 157 Elastomeric Materials
Explore UL 157 elastomeric materials, certified for sealing applications requiring fire resistance and durability. Learn about their features, compliance with UL standards, and how they ensure reliable performance in critical environments.
UL-Regulated Materials Available
Click here to see some of our most commonly served industries!
Canyon Components supports customers across multiple industries with UL Certified Viton™ materials, offering material identification, compliance guidance, documentation support, and custom sealing solutions. Whether your application requires flame-rated O-rings for electrical equipment or UL-recognized gaskets for industrial systems, our engineering team is ready to help.
Canyon Components strives to meet all customer service requests. Feel free to contact Canyon Components engineering and let our knowledgeable staff help you design the perfect part for your needs.
Fluorosilicone (FVMQ)
Fluorosilicone O-rings and gaskets combine fuel resistance with low-temperature flexibility, making them suitable for specialized UL-regulated applications exposed to hydrocarbons and environmental extremes.
Silicone (VMQ, PVMQ)
Silicone O-rings and gaskets are widely used in UL-certified applications due to excellent flame resistance, thermal stability, and electrical insulation performance.
EPDM (Ethylene Propylene)
EPDM O-rings and gaskets are commonly used in UL-regulated electrical enclosures and industrial equipment requiring strong ozone, weather, and steam resistance. UL-rated compounds support insulation and environmental sealing requirements.
NBR (Nitrile, Buna-N)
NBR O-rings and gaskets are used in UL-regulated industrial equipment requiring dependable oil and fuel resistance, mechanical durability, and cost-effective environmental sealing.
Please consult a Canyon Components Engineer about your specific application and we will use our decades of experience to formulate a solution that fits your need.
All Other FKM (Viton™) Types Available
Viton™ Type A – General Purpose FKM
Viton™ Type A FKM O-rings, gaskets, and custom molded parts provide balanced heat and chemical resistance. This general purpose fluorocarbon elastomer is widely used in industrial sealing applications involving fuels, oils, and hydrocarbons.
Viton™ Type B – Improved Chemical Resistance FKM
Viton™ Type B FKM offers enhanced resistance to aggressive fuels, aromatics, and chemical blends compared to Type A. This high-fluorine fluorocarbon elastomer is commonly specified in demanding fuel systems.
Viton™ Type F – Improved Chemical Resistance FKM
Viton™ Type F FKM provides superior resistance to oxygenated fuels, solvents, and aggressive chemical environments. This fluorocarbon elastomer is frequently used in automotive and industrial fuel sealing applications.
Viton™ Type GF – High Fluorine FKM
Viton™ Type GF FKM features increased fluorine content for improved resistance to fuels, biodiesel, and harsh chemicals while maintaining strong mechanical properties and sealing reliability.
Viton™ Type GLT – Low Temperature FKM
Viton™ Type GLT FKM delivers improved low-temperature flexibility compared to standard fluorocarbon elastomers, supporting sealing performance in colder climates without sacrificing chemical resistance.
Viton™ Type GFLT – Low Temperature and Chemical Resistant FKM
Viton™ Type GFLT FKM combines enhanced low-temperature flexibility with improved resistance to aggressive fuels and chemical blends, making it suitable for demanding fluorocarbon sealing applications.
Viton™ Type ETP – Specialty Chemical Resistant FKM
Viton™ Type ETP FKM provides exceptional resistance to aggressive chemicals, steam, and amines. This specialty fluorocarbon elastomer is often used in oil, gas, and chemical processing systems.
Viton™ Type ULT – Ultra Low Temperature FKM
Viton™ Type ULT FKM is engineered for ultra-low temperature environments while maintaining fluorocarbon chemical resistance, making it suitable for extreme cold industrial and aerospace sealing systems.
Viton™ Type XLT – Extreme Low Temperature FKM
Viton™ Type XLT FKM extends low-temperature sealing capability beyond GLT grades, offering reliable fluorocarbon elastomer performance in severe cold and aerospace environments.
Back to Industries Hub
Get A Quote Now!
Groove Design References
Learn More
Coatings, Packaging, & Other Services
Learn More
Custom Parts & Custom O-rings
Learn More